Dresser with drawers – is an example of simple combined furniture with the minimum quantity of fixtures. It is necessary to establish guides on side panels for boxes. In not through holes of the sides and ends of the canopy pour a little glue, insert dowels and easily hammer them together while connecting elements, after which insert euro screws. The top cover is fixed with dowels and minifixes, a pin goes into the cover, eccentric – into a sidewall, then tighten up the euro screws. The following stage is to nail the back wall, after pre-checking diagonal, to collect boxes, set the guides on them to screw the knobs into the prepared hole.
Standard sleeping bed. After checking the availability of all details of the design, collect the base – the transverse and longitudinal bars of the framework connects the euro screws or self-tapping screws. On the center fix a transverse beam, slats are installed in the specially prepared grooves. The sidewalls of the frame are fixed with pinned caps. Other elements of the bed are fixed on the bolts, screw in the legs, if there are any, put the mattress in the base box. Double model is assembled by the same principle.